HDPE - Eastmed Minerals FZCO

Go to content

Main menu:

×

HDPE


HDPE: HF-4760(BL3)


PRODUCT DESCRIPTION
HF-4760(BL3) is a blow molding grade resin with high density
polyethylenee with 1-Buteneasco monomer which is manufactured
bythe suspension polymeriza- tion ofethylene monomer.
Stiffness, good ESCR are it's special properties.High rigidity and
good flowablity which made it proper for usage in bottles and
small blow molding goods. 

FEATURES 
  • High Density and Stiffness
  • Good Flowability
  • Impact Strength

APPLICATIONS
  • Small Blow Moulding Bottle Containers (up to 5 liters)
  • Packing of Pharmaceuticals and Surfactants.


Resin Property
Value
Units
Test Method
    Density                              0.954                g/m3                  ISO 1183
    Melt Index (21.6)                23                    g/10min              ISO 1133
    Melt Index (5)                    1.2                   g/10min              ISO 1133
    FRR (21.6/5)                      19
    Molded Properties
   Notched Impact @ 23°C       9                     mJ/mm2           ISO 179/1 eA

Note: typical properties, not to be construed as specifications.



HDPE: HD-52518



PRODUCT DESCRIPTION
  • 52518 is a HDPE copolymer for injection
     molding for application requiring a good
     balance between easy of processability and
     flowability and mechanical properties. 

TYPICAL APPLICATION
  • Housewares
  • High Fluidity

PROCESSING CONDITION
Recommended barrel temperature range of 190°C to 280°C.

STORAGE AND HANDLING
  • Should not be stored in direct sunlight and/or heat.
  • Should be stored in a dry place, preferably under 50°C
  • It is recommended to process PE resin within 6 months after deliver. 


Resin Property
Value
Units
Test Method
  Density                                0.952                 g/cc                  D 1505
  Melt Index                            18                     g/10min            D 1238
       Thermal Properties 
  Vicat Softening Point              122                   °C                    D 1525
     Molded Properties
  Flexural Modulus                   1350                 MPa                   D 790
  Notched Impact @23°C          25                    J/m                   D 256/A

Note: typical properties, not to be construed as specifications.


 
Copyright 2015. All rights reserved.
Back to content | Back to main menu